Installing The Base Cover - Dell Latitude 9450 2-in-1 Owner's Manual

CAUTION: Do not lift the base cover from the top side immediately after prying it from the recesses, as this
will cause damage to the base cover. Proceed with the following steps to loosen all the hooks that secure the
base cover to the system before removing the base cover.
3. Pry open the top side of the base cover and continue working on the left, right and, bottom sides to open the base cover.
4. Hold the left and right sides of the base cover, and remove the base cover from the system.

Installing the base cover

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the base cover and provide a visual representation of the installation procedure.
Figure 22. Installing the base cover
44 Removing and installing Customer Replaceable Units (CRUs)