Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, and the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 25. Screw list
Component
Base cover
Solid-state drive
WWAN card
Right fan
Left fan
Display cable/Left Type-C
bracket
Right Type-C bracket
Display assembly
Heat sink
Battery
Right speaker
WLAN antenna module
36
Working inside your computer
Screw type
Captive screws
Captive screw
M1.6x2.3
M1.6x3
M1.6x3
M1.6x3
M1.6x3
M2.5x4
Captive screws
M2x3
M1.6x1.8
M1.6x2
Quantity
6
1
1
2
2
2
3
6
3
6
2
2
Image
Image: M2x3