Battery Activation
1.
The battery compartment is located on the back side of
the control panel. Remove the cover plate to access both
the 9 V (optional) and 3 V CR2032 lithium batteries.
2.
Remove the plastic tab from the CR2032 battery slot to
activate real-time date and time backup.
3.
To replace the CR2032 battery, slide the blue lever down
to eject the old one.
4.
Optional: If desired, use a 9 V battery (not included)
to program the control panel when removed from
the cabinet. Note that the control panel cannot
run automatic schedules or activate stations on
battery-supplied power.
5.
Reinstall the cover plate to enclose the battery
compartment.
14
①
③
④
②
⑤
hunter.help/ICC2EM