Clik Delay; Total Run Time; Test Program; Easy Retrieve™ Memory - Hunter ICC2 Owner's Manual

CLIK DELAY

This feature allows the user to delay programmed watering
for a designated period of time AFTER a Clik event occurs.
For example, heavy rain is in the forecast and you won't
need to irrigate for multiple days after the storm. The
Clik Delay can postpone automatic programming from 1–7
days after the Clik Sensor is triggered. At the end of the
Clik Delay period, the controller will resume normal
automatic watering.
1. With the dial in the Run position, press and hold the
button, turn the dial to the System Off position, and
release the + button.
2. The display will show "OFF –" with the dash blinking.
+ –
Press the or buttons to increase or decrease the
number of Clik Delay days. Once the correct number of
days is displayed, return the dial to the Run position.
3. After a Clik event ends (e.g., the rain sensor dries out
and deactivates the sensor), the Clik Delay feature will
become active and will display on the screen for the
entire Clik Delay duration.
Note: An active Clik Delay can be cancelled at any time
by simply turning the dial to the System Off position,
waiting for "OFF" to stop blinking, and returning the dial
to the Run position. Also, any station that is set with the
Programmable Sensor Override feature will operate during
a Clik Delay.

TOTAL RUN TIME

The ICC2 Controller keeps a running total of each program's
station run times. This feature provides a quick way to
determine how long each program will irrigate.
1. Turn the dial to the Run Times position.
2.
From the Station 1 run time, press the
review the total of all run times in the program. You can
also view the total run time by pressing the
once after advancing to the highest station run time.
3. Press the PRG button to review total run times of
additional programs.
Built on Innovation
®

TEST PROGRAM

The Test Program feature offers users a simplified method
for manually starting any or all stations sequentially. This
feature operates each station in numerical order, from
lowest to highest, and can be started from any specific
station. This is beneficial for quick operation of your
irrigation system.
1.
+
2.
3.
EASY RETRIEVE™ MEMORY
The ICC2 Controller is capable of saving the preferred
watering program into memory for retrieval at a later time.
This feature creates a quick way to reset the controller
to the original programmed watering schedule, and it's
particularly beneficial when overwriting any unwanted
changes to the current program.
1.
2.
◄
button once to
► button
Hidden and Advanced Features
With the dial in the Run position, press and hold the
button. Station 1 will appear with a run time flashing
(controller default is set to 0:00).
Press the ► and ◄ buttons to select the station you'd
like to run first. Press the + and – buttons to increase or
decrease the station run time (0 to 15 minutes). The run
time entered will be applied to all stations.
After a two-second pause, the Test Program will begin.
You can advance forward and backward through the
stations if you don't need a particular zone to run for the
full duration.
With the dial in the Run position, press and hold the
and PRG buttons simultaneously. Once three dashes
appear on the screen, release the
The symbol will scroll left to right across the display
indicating the program is being saved into memory.
The display will show "DONE" once saved, and it will
then revert back to the time-of-day display.
To retrieve a program that was previously saved into
memory, leave the dial in the Run position and press and
hold the – and PRG buttons simultaneously. Once the
same three dashes appear on the screen, release the
PRG
and buttons. The symbol will scroll right to left
across the display indicating the program is being loaded
from memory. The display will show "DONE" once
loaded, and it will then revert back to the time-of-day
display.
PRG
+
+ PRG
and buttons.
–
31