Troubleshooting - Caple DD523BK Instruction Manual

T R O U B L E S H O O T I N G
P R O B L E M
The downdraft does not work
G
sult of the new EU65 "Energy label" and
Ecodesign" regulations issued by the Euro-
ommission, which came into force as from
1st, 2015 , our products have been adap-
omply with these new requirements.
e models complying with the energy label
ments, are equipped with new electronics
g a timer device for suction speeds control,
e air capacity exceeds 650m³/h.
The downdraft has low performance
motor models, with maximum air capacity
han 650m³/h, are equipped with a timer de-
automatically switches the suction speed
to 3rd speed, after 6 minutes operation.
motor models are equipped with remote
hat , as for internal motor versions, inclu-
er device that switches down the suction
when it exceeds 650 m³/h. (See External
nstructions)
motors, whose air capacity exceeds
at both 4th and 3rd speed, will have the
g by default timer control functions:
tion speed is automatically switched from
nd speed, after 6 minutes operation. The downdraft stops in the middle of
pliance is working at 3rd speed, it is auto-
operation.
y switched to 2nd speed, after 7 minutes
n. Operation speeds can also be changed
peration.
rgy consumption of the appliance in stand
de is lower than 0.5W.
unctions:
ic turn off:
hours of continuous operation from the last
he appliance turns off automatically.
filters saturation
hours of operation, the speed indicators
all flash simultaneously, signaling the
ilters saturation. To reset this alarm, hold
MER" button down for at least 3 seconds,
e extractable unit is open.
ps located under the
g.8
8
S O L U T I O N
Check that:
» There is not a power outage.
» A specific speed has actually been selected.
» The red reset key, found over the electrical system box, is pushed.
Check that:
» The motor speed selected is sufficient for the quantity of fumes and
vapours present in the room.
» The kitchen is ventilated well enough to allow air for intake.
» The charcoal filter is not worn out. (Recirculation mode only).
» The air outlet channel is free and compliant with paragraph no.2.
» The non-return valves of the suctioning unit are free to rotate.
Check that:
» There is not a power outage.
» The omnipolar device has not tripped.
Please keep this instruction manual for future reference
Instruction manual DD523BK
21