Advertisement
T R O U B L E S H O O T I N G
FA U LT
The lights on, but the fan
does not work.
The lights and fan do not
work.
Serious vibration of the
unit.
The extraction
performance is not good.
If the above table has not solved the problem please contact Caple Service by phone on
0117 938 7420 or by email service@caple.co.uk
18
Instruction manual SP612 / SP912
C A U S E
The fan blade is jammed.
The motor is damaged.
A blown fuse.
The power cord is loose.
The fan blade is damaged.
The fan motor is not fixed tightly..
The unit is not hung correctly on the
bracket.
The filter requires cleaning.
Please keep this instruction manual for future reference
S O L U T I O N
Switch off the unit and contact Caple Service. To
be repaired by qualified service personnel only.
Replace the fuse.
Plug in to the power supply again.
Switch off the unit and contact Caple Service. To
be repaired by qualified service personnel only.
Switch off the unit and contact Caple Service. To
be repaired by qualified service personnel only.
Take down the unit and check whether the
bracket is in the correct location.
Clean the grease filter as directed in the 'Care
and maintenance' section. Replace the charcoal
filter (if in recirculation mode).
Advertisement
