Troubleshooting - Caple AH600BK Instruction Manual

T R O U B L E S H O O T I N G
FA U LT
The lights on, but the fan does
not work
The lights and fan do not work
Serious vibration of the unit
The extraction performance is
not good
If the above table has not solved the problem please contact Caple Service by phone on
0117 938 7420 or by email service@caple.co.uk
C A U S E
The fan blade is jammed
The motor is damaged
A blown fuse
The power cord is loose
The fan blade is damaged
The fan motor is not fixed tightly.
The unit is not hung correctly on the
bracket
The filter requires cleaning
Please keep this instruction manual for future reference
S O L U T I O N
Switch off the unit and contact Caple
Service. To be repaired by qualified service
personnel only.
Replace the fuse
Plug in to the power supply again
Switch off the unit and contact Caple
Service. To be repaired by qualified service
personnel only
Switch off the unit and contact Caple
Service. To be repaired by qualified service
personnel only
Take down the unit and check whether the
bracket is in the correct location.
Clean the grease filter as directed in the
'Care and maintenance' section. Replace
the charcoal filter (if in recirculation mode)
Instruction manual AH600BK 19