Installation - Caple DD523BK Instruction Manual

I N S T A L L A T I O N
Before carrying out the appliance installation, please check that all components are not damaged,
in such a case contact your retailer and do not carry out any installation operation. Furthermore,
please read carefully all of the following installation instructions.
› Use ducting that does not exceed 5 metres in length.
› Limit the number of elbows in the ducting, since each elbow reduces the air capacity of
1 linear metre. (eg. if you use no. 2 x 90° elbows, the length of ducting should not exceed
3 metres).
› Avoid abrupt direction changes.
› Use a 150mm constant diameter rigid ducting pipe for the whole length.
› Use ducting approved by standards in force.
The manufacturer shall not be deemed responsible for air capacity or noise problems caused by
failure to comply with the above instructions and no warranty on the product shall be provided.
1. Before making the cut-out check that there are no structural or other parts inside the cabinet,
where the appliance is to be placed, which could hinder a proper installation. Check that the
dimensions of the Downdraft and the ones of hob are compatible with the cabinet so that the
installation can be carried out properly.
Please keep this instruction manual for future reference
Instruction manual DD523BK
9