Control Elements; Potentiometers; Indicators; Technical Data - WAGO Eco 2 Series Product Manual

2687-2146

3.5 Control Elements

The control elements are described below.
For information on using these controls, see

3.5.1 Potentiometers

A potentiometer is located on the front of the product for setting or adjusting the output
voltage.
The potentiometer can be used to set the output voltage between 23 ... 28 VDC.

3.6 Indicators

The indicators are located on the front of the product.
The "DC OK" LED indicates the status of the output voltage U
The "Overload" LED indicates the overload status.
LED
DC OK
Overload

3.7 Technical data

3.7.1 Product

Property
Width
Height
Depth from upper-edge of DIN-rail
Weight
Protection type
Product manual | Version: 1.0.0
Power Supply Eco 2
Description Status
AN
Overload on
8 Operation [} 28].
.
OUT
Figure 6: LED "Overload" and LED "DC OK"
Explanation
Output voltage ≥ 21 V
Constant cuurent up to 105 ... 110 %
Table 1: Technical Data – Product
Value
Still missing
Still missing
Still missing
Still missing
Still missing
Properties
Figure 5: Potentiometer
15