Indicators; Control Elements; Potentiometers; Technical Data - WAGO Eco 2 Series Product Manual

Properties
Position
3
4

3.5 Indicators

The indicators are located on the front of the product.
The "DC OK" LED indicates the status of the output voltage U
LED
DC OK

3.6 Control elements

3.6.1 Potentiometers

A potentiometer [Adj.] is provided on the front of the product for setting or adjusting the
output voltage.
The potentiometer can be used to set the output voltage between 22 ... 29 VDC.

3.7 Technical data

3.7.1 Product

Property
Width
Height
Depth
Depth from upper edge of DIN rail
Weight
Protection type
14 Product manual | Version: 1.0.0
Power Supply Eco 2
Description
Termination 2 "-" for output voltage
Lever
Description State
Green ON
.
OUT
Figure 5: "DC OK" LED
Table 6: Legend for "LED, DC OK" Figure
Explanation
Output voltage ≥ 18.5 V
Figure 6: Potentiometer
Table 7: Technical Data – Product
Value
25 mm
100 mm
97 mm
90 mm
170 g
IP20
2687-2142