Connections - Panasonic KX-TS800 Operating Instructions Manual

KX-TS880.book Page 9 Friday, October 15, 2010 5:04 PM

Connections

Connect the handset cord (1) to the handset and the unit. Connect the
telephone line cord until it clicks into the unit and telephone line jack (2).
After line connection, lift the handset to check for a dial tone.
DSL /ADSL filter *
(Not supplied)
To single-line telephone
jack (RJ11C)
≥ Use only a Panasonic handset for KX-TS880.
≥ Use only the supplied telephone line cord. Using another telephone line cord may not
allow the unit to work properly.
* For DSL/ADSL service users
Please attach a DSL /ADSL filter (contact your DSL /ADSL provider) to the
telephone line between the unit and the telephone line jack in the event of the
following:
s noise is heard during conversations.
s Caller ID features do not function properly.
For assistance, please visit http://www.panasonic.com/help
2
Preparation
1
9