Modifiable Parameters; Alarm Trigger Time Thresholds - Smeg CWG410M Manual

6.4 Modifiable parameters
This table lists the model choice or cycle and temperature option parameters.
F/ ID Description
M
M P0 Appliance Type
F P1 Appliance Model
M P2 Boiler temperature
M P3 Tank temperature
M P4 Thermostop option
M P5 Soft Start option
M P6 Boiler temperature offset
M P7 Tank temperature offset
M P8 Real temperature display
F P9 Tank probe type
Note for P6 and P7: negative numbers are indicated by illumination of both decimal points (e.g.: ‐12

"1.2.") "1.2.")
6.5 Alarm trigger time thresholds
This table lists all the safety device trigger time thresholds.
F/
ID Description
M
F A0
F A1 Boiler max. heating time
F A2 Tank max. heating time
F A3 Maximum water intake time
F A4 Maximum emptying wait time
‐ CWG410 ‐
Default Min. Max
1 1
80C 60C
58C 40C
0 0
1 0
0 ‐20
4 ‐20
1 0
1 0
Min
Default
.
20 min 5
50 min 5
5 min 1
1 min 1
16
Notes
4 Construction version
Do not modify
Do not modify
90C Step 1 degree
WARNING: The actual
boiler temperature
depends on whether the
connection is single‐phase
or three‐phase.
With three‐phase
connection, do not set
more than 85°
65C Step 1 degree
1 0=off 1=on
1 0=off 1=on
+20 Real=measured+Offset
+20 Real=measured+Offset
1 0= filtered, 1= real
1 Do not modify
Max
Notes
60 Step = 1 min
60 Not active with PL ON
20 Step = 1 min
2 Step = 1 min