Changing The Program (Not Possible Once The Program Has Started) - Smeg CWG410M Manual

8.5 Changing the program (not possible once the program has started)
Glasses
Load glasses upside down. (See photo)
Cutlery
Use the basket(s) provided. Load cutlery loose, preferably with the handle at the bottom, taking care not
to injure yourself with fork prongs or knife blades.
Plates
The basket is able to take 8
plates.
Remove solid residues (bones,
fruit peel, stones, etc.) and
first soak plates with dried
residues of cheese, egg, etc. in
water.
TOTAL PUMP‐OUT AT THE END OF THE DAY
The dishwasher is able to perform a pump‐out and self‐cleaning cycle with automatic switch‐off.
‐ CWG410 ‐
If the master switch is not turned off, the
appliance sets on the last cycle performed. To
change it, press the key of the program
required; the light comes on.
To confirm hold down for about 2". The LED
starts to flash and the washing cycle starts.
Press the pump‐out button for about 2", the
LED flashes and the pump‐out and automatic tank
cleaning phase starts.
23