Modifiable Parameters; Alarm Trigger Time Thresholds - Smeg CWH510D Manual

5.4 Modifiable parameters
This table lists the model choice or cycle and temperature option parameters.
F/M ID Description
M P0 Appliance Type
F P1 Appliance Model
M P2 Boiler temperature
M P3 Tank temperature
M P4 Thermostop option
M P5 Soft Start option
M P6 Boiler temperature
offset
M P7 Tank temperature
offset
M P8 Real temperature
display
F P9 Tank probe type
Note for P6 and P7: negative numbers are indicated by illumination of both decimal points (e.g.: ‐12
"1.2.")
5.5 Alarm trigger time thresholds
This table lists all the safety device trigger time thresholds.
F/
ID Description
M
F A0
F A1 Boiler max. heating time
F A2 Tank max. heating time
F A3 Maximum water intake time
F A4 Maximum emptying wait time
‐ CWH 510 D
CWH510D Notes
03 Construction version
Do not modify
03 Do not modify
80C Step 1 degree
WARNING: The actual boiler
temperature depends on whether
the connection is single‐phase or
three‐phase.
With three‐phase connection, do not
set more than 85°
58C Step 1 degree
01 0=off 1=on
01 0=off 1=on
00 Real=measured+Offset
04 Real=measured+Offset
01 0= filtered, 1= real
01 Do not modify
Min
Default
20 min
60 min
5 min
1 min
17
Max
Notes
.
5 60 Step = 1 min
5 60 Not active with PL ON
1 20 Step = 1 min
1 2 Step = 1 min
