Installation And Positioning - Smeg CWG410M Manual

KEY TO LETTERS USED IN DIAGRAM
R LOWER BACK PANEL
C
Q
E ELECTRICITY SUPPLY CABLE
P PERISTALTIC HOSES
S

3 INSTALLATION AND POSITIONING

INSTALLATION and POSITIONING
Bring the dishwasher to the installation site, remove the packaging and check the appliance and
components for damage; any damage found must be reported to the transporter in writing.
The packaging components (plastic bags, expanded polystyrene, nails, etc.) must not be left within reach
of children and pets since they are potentially dangerous.
All packaging materials used are environment‐friendly. They can be kept without constituting any
hazard, or may be disposed of at a specialist waste disposal centre.
The plastic components suitable for recycling are marked as follows:
PE polyethylene: external packaging film, bag containing the instructions, protective bags.
PP polypropylene: straps.
PS expanded polystyrene: corner guards, top of packaging.
Wooden and cardboard components can be disposed of in accordance with the relevant regulations.
When the product is decommissioned it must not be dumped in the environment; it must be disposed of
in accordance with the relevant regulations. All metal parts are in stainless steel and can be removed.
The plastic parts are marked with the symbol identifying the material used.
FILLER HOSE
EARTH TERMINAL
DRAIN HOSE
‐ CWG410 ‐
8