6.1.7 tStP (minimum rinsing temperature) function
Set at "on" for minimum rinsing temperature as set.
Set as "off" to accept minimum rinsing temperature a few degrees lower than the setting if hot intake water is not
used.
6.1.8 Rinse aid pump
Display (also reset when needed)
6.1.9 Detergent pump
Display (also reset when needed)
6.1.10 Energy consumption – Display and reset
6.1.11 Customisation of duration of program P4
The duration of program P4 can be customised from 5 to 20 minutes using the appliance parameter modification
procedure, but the dishwasher must be set on program P4.
Modify the parameter (ON/OFF) by pressing
To reset, press
To reset, press
To reset, press
After setting program P4 access the programming
procedure and scroll through to "ınF" (last parameter to
appear) then press the
of the cycle (from 5 to 20 minutes)
After a few seconds without the user pressing any
buttons, the display will return to the normal operating
status and the modifications will be saved.
11
for 3 seconds.
for 3 seconds.
for 3 seconds.
button to modify the duration
.