Before Washing; First Use Each Day (Tank And Boiler Empty) - Smeg CW500 Manual

8.2 Before washing

Use only detergents and rinse aids for industrial dishwashers.
Do not use detergents intended for hand washing.
We recommend the use of Smeg products, specially developed for this dishwasher.
When topping up the tanks, take care not to swap the products; this might damage the dishwasher and
cause malfunctions.
Do not mix different detergents; this would damage the dispenser device.
Industrial dishwasher detergents may cause serious irritations. Comply carefully with the instructions provided by
the detergent producer on the pack.
Turn on the
mains water
The level of
tap (user)
detergent and
rinse aid in the
containers.

8.3 FIRST USE EACH DAY (tank and boiler empty)

Indicator lights as follows:
Display shows
Check:
That there is
regenerating salt
in the relative
container (if
fitted).
off; green; orange;
That the filters are in place,
the spray arms rotate, and
there are no foreign bodies in
the dishwasher.
flashing.
Actions and what happens
With the door closed:
Press and hold it down
the dishwasher fills the tank after the water in the boiler
has heated up; light L2 shows orange and the boiler
heating element symbol
Wait for P1 to appear and LED L1 to change from
orange to green;
the tank heating element comes on until the set
temperature is reached. The duration of this stage may
vary depending on the mains water temperature and on
the single-phase connection.
Press the button to display the tank (left) and boiler
(right) temperatures.
Load the dishes
Select the program required by pressing
Confirm the program start by pressing
down for 1 second (light L2 changes from green to
orange).
15
Switch on the master
switch (user): the
word "OFF" appears
on the display.
appears on the display.
.
and holding it