Table of Contents
Advertisement
10.3 Selecting the "sanitisation" function (only available in P3)
Increases the washing and rinsing temperature and the program duration
N.B.:
the supplementary function remains selected until the program is changed or the dishwasher is switched off
‐
by pressing the
During the selected program, the display alternates between showing the supplementary function and the
‐
duration.
LOADING THE DISHES
Plates
The basket is able to take
12 soup plates or 18 dinner plates.
Remove solid residues (bones, fruit
peel, stones, etc.) and soak plates with
dried residues of cheese, egg, etc. in
water before loading in the dishwasher.
Glasses: Load glasses upside down.
Cutlery: Use the special basket(s). Load cutlery loose, preferably with the handle at the bottom, taking care not to
injure yourself with fork prongs or knife blades.
TOTAL PUMP-OUT AT THE END OF THE DAY
The dishwasher is able to perform an automatic cleaning cycle at the end of the day.
After a total pump-out the filters should be cleaned as described above.
Never switch the dishwasher off with water in the tank; pump out first.
button.
Select the program required
(7.4 OPERATION)
Press
to select the sanitisation function then
confirm the program start.
Press the
button; "UnLo" and the duration appear
on the display.
Confirm by pressing
At the end of the pump-out, the appliance sets in
"OFF" status.
18
; light L2 turns orange.
to
Hide quick links:
Advertisement
Table of Contents
