Detergent Pump; Rinse Aid Pump; Customisation Of Duration Of Program P4 - Smeg CWC600 Manual

6.1.7 Detergent pump

Display (also reset when needed)

6.1.8 Rinse aid pump

Display (also reset when needed)
6.1.9 Energy consumption – Display and reset

6.1.10 Customisation of duration of program P4

The duration of program P4 can be customised from 5 to 20 minutes using the appliance parameter modification
procedure, but the dishwasher must be set on program P4.
6.1.11 Setting the Model (for After-Sales Service only)
To reset, press
To reset, press
To reset, press
After setting program P4 access the programming
procedure and scroll through to "ınF" (last parameter to
appear) then press the
of the cycle (from 5 to 20 minutes)
After a few seconds without the user pressing any
buttons, the display will return to the normal operating
status and the modifications will be saved.
Modify by pressing
for 3 seconds.
for 3 seconds.
for 3 seconds.
button to modify the duration
.
10