Rinse Aid Pump (Display And If Required Reset During Maintenance); Detergent Pump (Display And If Required Reset During Maintenance); Energy Consumption - Display And Reset If Required; Customisation Of Duration Of Program P4 - Smeg CW521D Manual

6.10 Rinse aid pump (display and if required reset during maintenance)
6.11 Detergent pump (display and if required reset during maintenance)
6.12 Energy consumption – Display and reset if required
6.13 Customisation of duration of program P4.
The duration of program P4 can be customised from 3 to 10 minutes
‐ CW 521/531
To reset, press
To reset, press
To reset, press
Access the programming procedure and scroll through to
"ınF" using the button, then to 03:00 and press the
button to set the time required (from 3 to 10 minutes)
After a few seconds without the user pressing any buttons,
the display will return to the normal operating status and the
modifications will be saved.
21
for 3 seconds.
for 3 seconds.
for 3 seconds.