Installation In A Sliding Sash Window - Gree GPC05AK-A3NNA2B Owner's Manual

26
9. Close the window sash securely against the Window panel.
10. Cut the sponge A to a proper length and seal the gap between upper part of
inner window sash and outer window sash.
11. Fix the inner window with window bracket and screw, so that it can not slide
vertically.dow sash securely against the Window panel.
Sponge A

Installation in a sliding sash window

1. Install rear clip: Aim the rear clip (upper) at the rear clip (lower), fix them toge
ther, firmly press the clasp into the groove.
Rear connector (upper)
Rear connector (lower)
2. Clamp joint B+C into the inner side of window frame along the direction of
arrow.
© Copyright, GREE Canada, 2021
Plastic window
Outer window
Wooden window
Inner window
INSTALLATION IN A SLIDING SASH WINDOW
Clasp
Window bracket