Electronic Programmer - Zanussi ZOB 471 User Manual

Electronic programmer

5
6
2
Fig. 4
The oven will only work if the time of
day has been set.
However, the oven can also be operated
without any programme.
Setting the time of day
When the power supply is switched on, or
after a power failure, the "Time of day" pilot lamp
will flash on the display.
To set the correct time of day:
1. Press button " " or " ".
2. After the setting is carried out, wait for 5 se-
conds: the "Time of day" pilot lamp
out and the display will show the set time. The
appliance is ready for use.
To reset the correct time of day:
1. Press button
"Time of day" function. The relevant pilot lamp
will start flashing. Then proceed as described
above.
The time of day can only be reset if no
automatic function (cooking duration
end of cooking
4
1 3
will go
repeatedly to select the
) has been set.
1. Push button for selecting a function
2. Decreasing control button " "
3. Increasing control button " "
7
4. Display
8
5. "Cooking Duration" pilot lamp
6. "End of cooking" pilot lamp
7. "Minute minder" pilot lamp
8. "Time of day" pilot lamp
or
electrolux 9
9