Zanussi ZOB 471 User Manual page 21

Hide thumbs Also See for ZOB 471:
Table of Contents

Advertisement

Available languages

Available languages

Oven Cavity
The enamelled base of the oven cavity is best
cleaned whilst the oven is still warm.
Wipe the oven over with a soft cloth soaked in
warm soapy water after each use. From time to
time it will be necessary to do a more thorough
cleaning, using a proprietary oven cleaner.
Cleaning the Oven Door
Before cleaning the oven door, we
recommend you to remove it from the oven.
Proceed as follows:
1. open the oven door completely;
2. find the hinges linking the door to the oven
(Fig. A);
3. unlock and turn the small levers located on the
two hinges (Fig. B);
4. handle the door by its left- and right-hand
sides, then slowly turn it towards the oven until
it is half-closed (Fig. C);
5. gently pull the oven door off its site (Fig. C);
6. place it on a steady plan;
Clean the oven door glass with warm soapy
water and a softh cloth only. Never use harsh
abrasives. Once the cleaning is carried out, refit
the oven door, following the procedure in reverse.
Stainless steel or aluminium appliances:
We recommend that the oven door is only
cleaned using a wet sponge and dried after
cleaning with a soft cloth.
Never use steel wool, acids or abrasive
products as they can damage the oven surface.
Clean the oven control panel following the same
precautions.
DO NOT clean the oven door while the
glass panels are warm. If this
precaution is not observed the glass
panel may shatter.
If the door glass panel becomes chipped or
has deep scratches, the glass will be weakened
and must be replaced to prevent the possibility of
the panel shattering. Contact your local Service
Centre who will be pleased to advise further.
electrolux 21
Fig. A
Fig. B
Fig. C
21

Advertisement

Table of Contents
loading

Table of Contents