Installing The Rear Camera - Uniden DASH VIEW 60+ Owner's Manual

Installing the Rear Camera

Install the rear camera at the centre top of the rear windshield.
1. Clean the area before installation.
2. Peel off the sticker protective film from the 3M sticker.
3. Press and apply force on the sticker mount onto the back windshield.
4. Connect the rear camera to one end of Converting Cable.
5. Connect the Cigarette Charger USB-C to the Converting Cable
USB-C Port.
6. Connect the Converting Cable USB-C to the Front camera.
7. Arrange and hide the cables to avoid obstruction for the driver's view.
8. Adjust the viewing angle of the camera by rotating the body of the camera.
We recommend the camera should point slightly downwards ~10° below
eye level.
Cigarette Charger or Hardwiring kit (HWK-3)
You may also refer to the latest Owner's Manual available
on the Uniden website for further information.
NOTE
UNIDEN DASH VIEW 60+/60R
Connect to
Connect to
Rear Camera
Converting Cable for Rear Camera
8
Connect to
Front Camera
Vehicle Recorder