Rear Camera - Uniden iGO CAM 345 Owner's Manual

Rear Camera

When the rear camera is connected to the Dash Cam and it is currently
powered on, press the UP button to change the dispay mode. The recording
resolution for the rear camera is 480P and the image is mirrored.
Reverse Camera (Optional)
The rear camera also works as a reverse camera when you connect it to the
reverse light power connector. After you set it up, when you put your vehicle
in reverse, the reverse camera will be displayed on the Dash Cam.
To setup the rear camera, please follow the diagram below.
It is recommended to get vehicle electrician to hard wire the
cable to the Reverse Light Power to use it as a reverse camera.
NOTE
UNIDEN iGO CAM 345
Black: Video Out Cable
MODE
UP
OK
DOWN
MENU
RED: +ve 12V Reverse
Light Cable
8
Vehicle Recorder