Installing The Optional Hardwiring Kit - Uniden DASH VIEW 60+ Owner's Manual

Installing the Optional Hardwiring Kit

If you wish to use the parking mode on the camera, you will need to install the
hardwiring kit provided.
1. Locate the location of the fuse box in your vehicle.
2. There are 3 wires that need to be connected: connect the Yellow cable
that goes to a constant fuse, RED cable that goes to an ignition-switched
fuse and BLACK cable that goes to a metal ground bolt.
YELLOW cable connect to BATTERY (+)
RED cable connect to car ACC
BLACK cable connect to car GROUND
3. Connect the USB-C end of the hardwiring cable to the camera
USB-C port (Dash View 60+)
or,
Connect the USB-C end of the hardwiring cable to the Converting Cable
USB-C port (Dash View 60R)
4. Start your vehicle to see if it works. Arrange and hide the cables to avoid
obstruction for the driver's view.
It is advisable to get a car electrician to professionally install the hardwiring
kit.
UNIDEN DASH VIEW 60+/60R
9
Vehicle Recorder