Power On; Power Off - Uniden DASH VIEW 60+ Owner's Manual

Power On

When connected to a car charger with power, the camera will
automatically power on and start recording.
NOTE
1. Connect the other end of the DC car adaptor to your car's cigarette
lighter.
2. Connect the DC car USB-C adaptor to the power connector USB-C port
found on the camera.
3. The camera will power on automatically when the car supplies the power
to the camera.
4. The BLUE led on the camera will start flashing and recording starts
automatically.
Be sure insert the SD card before powering up the device.
Format the SD card before you start recording for the first time.
NOTE

Power Off

When the car's engine is turned off, the device will automatically turn off in a
few seconds.
Power Information
The device is designed mainly for in-vehicle use, drawing on vehicle power or
the vehicle battery when using the hardwing kit (HWK-3).
The Dash VIEW 60+/60R has an in-built high quality, long life supercapacitor.
It provides enough backup power to ensure any recording in progress is
stored safely before shutting the camera off.
For the first time use, it is advisable to format the SD Card.
NOTE
UNIDEN DASH VIEW 60+/60R
11
Vehicle Recorder