Recording; Set Up Date/Time - Uniden DASH VIEW 60+ Owner's Manual

Recording

When connected to a car charger with power, the unit automatically goes into
the record mode and starts recording.
A flashing BLUE led on the device indicates that the device is recording.
To record a video, ensure that a valid micro SD card is inserted
in the given slot. Also note, that inserting/removing the SD card
when the device is recording causes the device to shutdown
NOTE
and in worst case missing recording files.
Protect the Current Recording
While recording, if you want to protect the current recordings, then press
the
Function key
overwritten by normal video recordings.
This also applies when the G-Sensor registers an impact while recording.

Set up Date/Time

Date Synchronize
To initial set up the correct Date/Time on your dash camera, you need
to connect to the Uniden Dash View App. Once connected with Wifi, go
to the 'Settings' and tap 'Time Sync' to ensure that the Date and Time is
synchronized correctly.
Daylight Saving Time
If you need to adjust for Daylight Saving Time, you can set up via the Uniden
Dash View App. By default, Daylight Saving Time is set to OFF.
UNIDEN DASH VIEW 60+/60R
ONCE. Those recordings have been locked and will not be
12
Vehicle Recorder