Important Safety Instructions Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. NOTE This product is intended for use in a motor vehicle. Don’t install the device where it will block the driver’s view of the road (including the mirrors!) or the deployment of the airbag.
Micro SD Card ....................... 9 GPS Reception Information ................9 Power On ......................10 Power Off ......................10 Recording ......................11 Using the App ....................12 Uniden Player ..................... 19 Troubleshooting ....................21 Specification ....................... 22 Warranty ................23 UNIDEN DASH VIEW 30 Vehicle Recorder...
3M Stickers • Owner’s Manual • If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products! • Need help? Get answers at our website: www.uniden.com.au for Australian model. UNIDEN DASH VIEW 30 Vehicle Recorder...
Page 6
5GHz and 2.4GHz Press and hold 5 seconds to switch On/Off Wi-Fi access point. Press and hold 10 seconds to format SD card. Press one time to access SD card files when connected to PC. UNIDEN DASH VIEW 30 Vehicle Recorder...
6. Adjust the viewing angle of the camera by rotating the body of the camera. We recommend the camera should point slightly downwards ~10° below eye level. Do not install the product in a location where it can obstruct the driver’s field of vision. NOTE UNIDEN DASH VIEW 30 Vehicle Recorder...
4. Start your vehicle to see if it works. Arrange and hide the cables to avoid obstruction for the driver’s view. It is advisable to get a car electrician to professionally install the hardwiring kit. UNIDEN DASH VIEW 30 Vehicle Recorder...
It is important to format the micro SD card before using it, so as to avoid any damage to the files created on DASH VIEW 30. Uniden only recommends using good quality MLC/SLC micro SD cards.
The device is designed mainly for in-vehicle use, drawing on vehicle power or the vehicle battery when using the hardwing kit (HWK-1R). The Dash View 30 has an in-built high quality, long life supercapacitor. It provides enough backup power to ensure any recording in progress is stored safely before shutting the camera off.
While recording, if you want to protect the current recordings, then press the ONCE. Those recordings have been locked and will Smart One Touch button not be overwritten by normal video recordings. This also applies when the G-Sensor registers an impact while recording. UNIDEN DASH VIEW 30 Vehicle Recorder...
Using the App The Uniden Dash View app allows you to control the Dash View camera via WiFi. You can easily preview, browsing files, playback and download the files in the SD card into your mobile phone. The app also allows you to make changes to the device setting.
Page 13
Downloaded Video Tap the Downloaded Video tab to view or playback downloaded photos or videos even when then the camera is not connected. About Tap to view app information or clear app cache data. UNIDEN DASH VIEW 30 Vehicle Recorder...
Page 14
Live View Device Settings Back SD Card File Recording Timer Full Screen Mode Snapshot Recording Resolution Recording Switch SD Card Microphone Resolution settings Switch Mode Camera View Switch UNIDEN DASH VIEW 30 Vehicle Recorder...
Page 15
Card. You can tap to the video file to play directly or download the video file to the mobile phone storage. Display Mode Not applicable for Dash View 30 series camera. Camera View Switch If a rear camera is connected, you can switch camera views.
Page 16
Opt to have the GPS coordinates displayed on the recordings. Anti-Flicker Change depending on the electrical power frequency in your area (Default setting is 50Hz and you may not have to change this setting). UNIDEN DASH VIEW 30 Vehicle Recorder...
Page 17
For example, if you opt for 1S, then an image is captured every 1 second. The captured images are then stitched together to playback a high speed video. Loop Recording Use this option to set the length of each video clip. UNIDEN DASH VIEW 30 Vehicle Recorder...
Page 18
Resets the device to factory settings. Note that restoring defaults will not erase data on the SD card. WiFi Tap to view and change the WiFi SSID and password for the WiFi access point Device Information Display the device firmware version. UNIDEN DASH VIEW 30 Vehicle Recorder...
Uniden Player Uniden Player allows you to view the recordings on the Dash View camera and trace them on a map. The software is supported on Windows 7, Windows 8 Windows 10 and on macOS.
Page 20
Ensure that the PC is connected to the internet to view the map screen. 2. Click on the Open icon to open the files on to the Uniden Player. 3. Click on the PLAY button (Playback Controls) to start playback.
Cool it down and try again. The recorded video Please ensure the PC is connected to internet. doesn’t show mapping information on the Uniden Player. If you still require assistance, visit our website or call our customer service. UNIDEN DASH VIEW 30 Vehicle Recorder...
Yes (up to 10m line of sight) Storage microSD (up to 128GB), Class 10/U1 and above Power Input 5V 2.0A Supercapacitor 5.5V 2.5F Operating Temperature -10°C ~ 60°C Storage Temperature -20°C ~ 70°C Working Humidity 10 ~ 80% UNIDEN DASH VIEW 30 Vehicle Recorder...
(“Uniden Aust”). Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the DASH VIEW 30 (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.
Page 24
Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden. Please refer to the Uniden website for address details. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.