Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Uniden Witness DC1
Summary of Contents for Uniden Witness DC1
- Page 1 Witness AUTOMOTIVE VIDEO RECORDER 2016/02/01 14:44:37 OWNER’S MANUAL...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Uniden does not represent this product to be waterproof. Do not expose this product to rain or moisture. • This product is intended for use in a motor vehicle. Don’t install the device where it will block the driver’s view of the road (including the mirrors) or the deployment of the airbag. • Keep your attention on the road! Don’t try to operate or focus on any device while driving. If you have to concentrate on the device, pull off the road for a few minutes. • Ensure that the camera lens is kept clean and there is nothing blocking the lens. • Don’t leave the device in direct sunlight for a long period of time or where the temperature could go above 140°F (60°C). -
Page 3: Table Of Contents
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ..... 2 OVERVIEW ..............5 FEATURES ..................5 WHAT’S IN THE BOX? ..............6 CONTROLS AND INDICATORS ........7 INSTALLATION AND POWER UP ......9 ATTACHING THE WINDSHIELD MOUNT ........9 INSTALLING THE MICROSD CARD ..........9 POWERING UP THE DC1 ............ - Page 4 TROUBLESHOOTING ..........20 SPECIFICATIONS ............21 ONE-YEAR LIMITED WARRANTY ......24...
-
Page 5: Overview
AUTOMOTIVE VIDEO RECORDER OVERVIEW The Uniden DC1 is an ultra-compact recorder that can be set up to continuously capture high quality video even in low light conditions. The built-in G-Sensor system triggers the camera to instantly begin recording if the vehicle is bumped or scraped. The built-in The DC1 can even record outside the vehicle for the duration of the internal battery’s power. FEATURES • 1.5” color screen • High Definition Recording • Infrared Night Vision • G-Sensor • Loop Recording • Auto Power Off • Date and Time Stamp • Records onto microSD Card (8GB included) • Internal Rechargeable Battery (up to 10 minutes) -
Page 6: What's In The Box
WHAT’S IN THE BOX? Uniden DC1 Windshield Mount DC (CAR) USB Cable 8GB MicroSD Adapter card... -
Page 7: Controls And Indicators
CONTROLS AND INDICATORS No. Item Description UP ▲ In Record mode, zoom in. In Menu list, move the cursor one line RED - Indicates charging When not recording, opens the Menu. MENU... - Page 8 No. Item Description BLUE - (Steady On) Not Recording BLUE - (Flashing) Recording DOWN In Record mode, zoom out. ▼ In Menu list, move the cursor, one line down In Record mode, press this button to start/stop video recording. Use this button to capture an image in Photo mode. Confirm a menu selection. Confirm changes in the settings. While recording, press to lock (save M / from overwrite) the current recording. Use this button to shift between Record, Photo, and Playback mode. POWER Press to turn power on. Press & hold to turn power off. In Record mode, press to turn Infrared LEDs (night vision) on/off. USB Port Connect External Power & charge battery Connect to PC for data (SD card) transfer Card Slot microSD card slot Lens Bracket Fit the bracket hook of the windshield Slot mount Records sound.
-
Page 9: Installation And Power Up
INSTALLATION AND POWER UP ATTACHING THE WINDSHIELD MOUNT Insert the windshield mount bracket hook into the bracket slot on the top of the DC1. After inserting the hook, slide it down until it locks in position. Press the suction cup flat against the windshield. Push the suction lock up until it snaps into place and tighten the locking collar to secure. Gently pull on the mount to make sure it is secure. INSTALLING THE MICROSD CARD A compatible microSD card (8GB supplied) is required to record and store videos and photos. The unit can support microSDHC cards (High Capacity microSD) up to 32GB in capacity. Uniden recommends using a good quality microSDHC card of at least 8GB capacity and minimum Class 10 speed. Insert a formatted microSD card gently in the slot on the... -
Page 10: Powering Up The Dc1
side of the unit. To remove the card from the slot, press the edge of the microSD card inwards for it to pop out and then pull it out of the slot. POWERING UP THE DC1 Only use the DC car adapter that comes with your device. Any other adapter might damage the device. Refer to your car’s owner’s manual to verify where the power outlets are on and around the dashboard. Locate an outlet that supplies 12V electric power when the key is in the ON or ACC position. Connect the car adapter to the camera and to the that power outlet. Start the car. The camera turns on automatically and begins recording. When the car’s engine is turned off, the camera will automatically turn off in a few seconds. Charge the camera for at least 15 minutes after it is turned on for the first time or after it has been turned off for more than three weeks. -
Page 11: Operating The Dc1
Full Empty Half Full OPERATING THE DC1 The DC1 operates in three modes: Record mode, Photo mode, and Playback mode. These modes also have menus to help you configure recording and taking photos. Press M/ until you access the mode you want. An icon appears in the upper left corner of the screen for each mode. Record Mode Photo Mode Playback Mode RECORD MODE To record video, verify that a valid microSD card (8GB supplied) is inserted in the microSD slot. Inserting or removing the microSD card when the unit is recording causes the device to shut down. Recording When connected to a car charger, the unit automatically goes into Record mode and starts recording. The icon displays on the screen, with a flashing red dot beside it to indicate recording is in progress. -
Page 12: Save Current Recording
A flashing red dot appears next to the icon. To stop recording, press OK and the red dot disappears, indicating that the recording has stopped. Save Current Recording You can save the file that is currently recording so that it will not be overwritten if space is needed. While recording, press M/ ; the icon appears on the screen. This indicates that the recording has been locked and will not be overwritten by new video clips. Press OK to stop recording. The icon disappears from the screen. Record Mode Menu You cannot access menus when the the unit is recording. To access the Record menus, stop recording by pressing OK. In Record, Photo or Playback mode, press the Menu key ( ) once to access the menu settings for that particular mode. Press it twice to display the Setup menu. - Page 13 Option Description Loop Loop recording allows you to set video Recording file length (1, 3, or 5, minutes; 3 minutes shown on icon). Selecting a file length activates loop recording. When the microSD card fills up, it loops back to the oldest file and records over it. If you select OFF, video file length defaults to 3 minutes. When the microSD card fills up, a Card Full message displays and recording stops. Exposure Sets the brightness sensitivity. Motion Enables this setting to allow the recorder Detection to start recording when it detects movement. Record Turns audio recording on/off. Audio Date Stamp Enables/disables the date and time on the image files. G-Sensor Detects significant or sudden movement; automatically locks the current recording. Key Tone Turns on sounds when you press keys.
-
Page 14: Photo Mode
PHOTO MODE The DC1 lets you take snapshots of live video that is not recording. You cannot take a snapshot of live video while it is recording. You also cannot take a snapshot of recorded video playing back. To take a snapshot: Verify that a valid microSD card is inserted in the microSD slot. Press M/ to select Photo mode; displays in the upper left corner. Press OK. The unit takes a snapshot of live video. Photo Mode Menu Like the Record mode menu, press the Menu key ( ) once to access the menu settings for the Photo mode. Press it twice to display the Setup menu. The Setup menu is common to all modes. See page Option Description Timer Sets the time gap for capturing an image. For example, if you select 2s, then that will be the delay between the OK button being pressed and the image being captured. Resolution Defines the image resolution. - Page 15 Option Description Continuous Activates continuous shooting mode; you Mode get up to 3 shots in one click. Quality Defines the quality of the images you capture. Sharpness Defines the clarity of detail in the images you capture. White Establishes the conditions to capture an Balance image based on the options given. Increases or decreases the camera’s light sensitivity. Sets the brightness sensitivity. (Exposure Value) Anti-Shake Reduces the camera shake and captures a better quality image. Quick Sets the time duration the image displays Review on the screen after it has been captured.
-
Page 16: Playback Mode
Option Description Date Stamp Enables/disables the date and time on the image files. PLAYBACK MODE This mode lets you play back recorded video or view snapshots. Press M/ until either (Playback) or ► (Snap- shot) displays in the upper left corner of the screen. Press OK to view the recorded file/snapshot or ▲ / ▼ to scroll through the recorded files/snapshots. Playback Mode Menu Press the Menu key ( ) once to access the Playback mode options. Scroll up or down and then press OK to select an option for the snapshot/video currently displaying. • Delete. Delete the current file displayed or delete all files. • Protect. Lock/unlock the current file displayed or lock/ unlock all files. SETUP MENU Press Menu key ( ) twice to access the Setup menu in any mode. The icon is highlighted in the upper left corner. - Page 17 Option Description Date/Time Changes the date and time by using the relevant ▲ and ▼ keys, and then press OK to confirm. Auto Power Sets the time duration to automatically power off the unit when idle. Language Select English (default), French, Spanish, or Portuguese. Frequency Select 50Hz or 60Hz (default) and press Screen Sets the time to automatically turn off the Saver LCD after the recording starts. License No Provides a way to identify the vehicle in which the device is mounted (up to 9 alphanumeric characters). Image Rotates the image. Rotation Format Formats the microSD card.
-
Page 18: License No Set Procedure
Option Description Default Returns all the settings back to the Setting factory defaults. Firmware Firmware Version LICENSE NO SET PROCEDURE This menu option lets you enter the license number or any other identifier (up to 9 alphanumeric characters) to label the vehicle in which the device is mounted. This feature is useful if the device is shared between vehicles and video needs to be linked to a specific vehicle or if you are monitoring multiple devices among several vehicles. If recording, press OK to stop. Press the Menu key ( ) twice to enter the Setup menu. Scroll to License No set option. Press OK to select The License No set character selector displays on the screen. Press ▲ or ▼ to scroll through the char- acter options. Character options are blank, 1 - 9, and A - Z (capital letters). Press the Menu key ( ) to select that character and move to the next position. The selector moves... -
Page 19: Connecting To A Pc
to the next space. Continue selecting characters. Default = all blank characters. Press OK after the entry is complete. Press the Menu key ( ) again to return to mode screen you started with. The identifier displays after the date/time stamp when the video is played back. To change a character: Press the Menu key ( ) repeatedly to cycle back through the characters to reach the character to change. Change the character using ▲ or ▼ and then press OK to select the new character. Pressing OK will also take you back to the Setup menu. To remove a character: Press the Menu key ( ) repeatedly to cycle back through the characters to reach the character to delete. Select a blank character and press OK. Pressing OK will also take you back to the Setup menu. CONNECTING TO A PC If you connect the DC1 to a PC (using the supplied USB cable), the PC provides the following 2 options: • Mass Storage • PC Camera MASS STORAGE Select the Mass Storage option to manage and view the microSD card contents on the PC. -
Page 20: Pc Camera
When the unit is detected on the PC as an external drive, select to view the DCIM folder. Click on the DCIM folder to open and view record- ings/images arranged in folders according to the specified date. The locked/protected recordings have file names beginning with “SOS,” thus enabling you to easily distinguish them from the rest of the recordings. PC CAMERA This options allows you to use the DC1 as a webcam. TROUBLESHOOTING General Problems Possible Solutions Camera does not turn off Check your vehicle’s when the car is turned off. owner’s manual to verify that you have connected the camera to a power outlet that only operates when the key is in the ON or ACC position. -
Page 21: Specifications
General Problems Possible Solutions The unit cannot take • Ensure that the microSD card is formatted photos or record videos properly and inserted correctly. The unit automatically • Use the recommended stops when recording type of microSD card (minimum 8GB Class Video is unclear Ensure that there are no fingerprints or dirt on the lens. Ensure that the lens is always kept clean. Dark images while Adjust the EV setting. recording water/sky Color of the images is not Set the ‘white balance’ setting to automatic. good Cross-stripe interference Verify that Frequency option in an image (Setup/Frequency) is set to 60Hz (North America). The unit crashes Using a pin or an unfolded paper clip, press and hold the Reset button to restart the unit. SPECIFICATIONS Screen 1.5 in. LCD DDR1... - Page 22 Operating 32° F ~ 122° F (0° C ~ +50° C) Temp. Storage 25° F ~ 140° F (-10° C ~ +60° C) Temp. Size 66mm (L) x 31mm (H) x 41mm (W) Working 10 ~ 90% Humidity Storage microSD (up to 32GB), Class 4 and above (8G microSD card included) Recording Recording Time: Off, 1 min, 3 min, 5 min, 10 min Time Video 1920x1080/1440x1080/1280x720/848x4 Resolution 80/640x480/320x240 View Angle 140° Zoom 4X digital zoom Power Supply • 12V Cigarette Car Charger Input: 12V~24V Output: DC5V/1A • 110mAh Built-in Lithium Polymer battery (10 min) Sensor Type 1.3 MP CMOS Image Sensor 1/3” Video Frame 30fps Rate Sound Yes (built-in microphone)
- Page 23 FCC/INDUSTRY CANADA COMPLIANCE FCC Compliance This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. IC Compliance This device complies with Industry Canada license- exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
- Page 24 Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any...
- Page 25 THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT & IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s manual you are certain that the Product is...
Need help?
Do you have a question about the Witness DC1 and is the answer not in the manual?
Questions and answers