Important Safety Instructions Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. NOTE This product is intended for use in a motor vehicle. Don’t install the device where it will block the driver’s view of the road (including the mirrors!) or the deployment of the airbag.
Plug it in, Power On/Off ..................9 Video Mode ......................10 Photo Mode ......................12 Tool Setting ......................13 Playback Mode ....................14 Connecting to a PC ...................14 Parking Mode ..................... 15 Important Information ................... 16 Warranty ................17 UNIDEN iGO CAM 600 Vehicle Recorder...
If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products! • Need help? Get answers at our website: www.uniden.com.au for Australian model. www.uniden.co.nz for New Zealand model. UNIDEN iGO CAM 600 Vehicle Recorder...
Controls & Indicators UNIDEN iGO CAM 600 Vehicle Recorder...
Page 6
(Use only Uniden’s USB cable). Converter • Connect to the Car Battery for Parking Mode. RESET If the device fails to operate properly, try resetting the device. Press the reset button by using a fine pen. Camera Lens Lens LEDs Infrared night vision LEDs Speaker Speaker UNIDEN iGO CAM 600 Vehicle Recorder...
It maybe a good idea to secure the power cord with cable clips so that it does not interfere while driving. Suction cups will not stick well on a curved/textured or wet surfaces. NOTE UNIDEN iGO CAM 600 Vehicle Recorder...
It is important to format the micro SD card before using it, so as to avoid any damage to the files created on iGO CAM 600. Uniden recommends using good quality micro SD cards. Battery Alert The unit has an in-built battery of 110mAh capacity.
At other times, press and hold the POWER button to turn it on or off. Only use the DC car adaptor that comes with your device. Any other adaptor might damage the device. NOTE UNIDEN iGO CAM 600 Vehicle Recorder...
NOTE Using the iGO CAM 600 you can record videos and take photos. To record videos, you need to ensure that the unit is in the Video mode. Press and hold MENU/MODE button to switch between Video, Photo and Playback modes.
Page 11
Displays or hides the date and time in the recordings. G-Sensor Use this setting to activate the Collision Detection sensitivity. In the event of sudden movement, such as a crash or an overturn, the G-sensor alerts the unit to save and lock the current recording file. UNIDEN iGO CAM 600 Vehicle Recorder...
Anti-Shaking When this setting is activated, the camera shake is effectively reduced, helping you capture a better quality image. Date Stamp Use to display or hide the date and time on the image files. UNIDEN iGO CAM 600 Vehicle Recorder...
Set to turn on/off the night vision LEDs. Format Use to format the SD card Default Setting Use this option to change all the settings back to the default factory settings. Version Firmware version. UNIDEN iGO CAM 600 Vehicle Recorder...
Connecting to a PC (Optional) The iGO CAM 600 can be connected to a PC (plug the USB cable (use Uniden’s USB converter cable) into the USB port). When the unit is connected to a PC, two options are displayed on the unit’s screen;...
CAM600 can detect voltage automatically. When the car is powered off, CAM600 keeps recording. But in order to prevent the car battery from draining off completely, CAM 600 will stop NOTE recording automatically when the voltage is less than 11.8V. UNIDEN iGO CAM 600 Vehicle Recorder...
This is due to the light frequency. image Change the light frequency depending on the local power supply. The unit crashes Press and hold the ‘Reset’ button, with a pin, to reset the unit. UNIDEN iGO CAM 600 Vehicle Recorder...
Terms of Warranty: Uniden Aust/NZ warrants to the original retail purchaser only that the iGO CAM 600 (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.
Page 18
Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the addresses shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
Need help?
Do you have a question about the iGO CAM 600 and is the answer not in the manual?
Questions and answers