Power On; Power Off - Uniden iGO CAM 35 Owner's Manual

Power On

When connected to a car charger with power, the device will
automatically power on and start recording.
NOTE
1. Ensure the USB Charging Cable is connected to the USB car charger.
2. Plug in the USB car charger to the car's cigarette lighter port.
3. Connect the other end of the USB cable into the micro USB port found on
the device.
4. The device will power on automatically when the car supplies the power to
the device.
5. The red dot on the screen will start flashing and recording starts
automatically.
Be sure insert the SD card before powering up the device.
Format the SD card before you start recording for the first time.
NOTE

Power Off

When the car's engine is turned off, the device will automatically turn off in a
few seconds.
Or,
Press and hold the power button for at least 3 seconds to turn off the device.
Do no eject the SD card immediately to prevent damage to the last recorded
file.
Only use the USB Car Charger Adaptor and USB cable that
comes with your device. Any other adaptor might damage the
device.
NOTE
UNIDEN iGO CAM 35
9
Vehicle Recorder