Table of Contents
Advertisement
5 Use the CURSOR
or
"ENABLE" and then press ENTER.
Items to select
• DISABLE .. Projector does not store the settings automatically.
• ENABLE ... Projector stores the settings automatically.
Automatic storing data is done when any one of the following
procedures is performed:
• Pressing the END button several times returns the adjustment
screen to the source screen.
• One input is switched to another.
• The projector is turned off.
• Every 10 minutes.
NOTE: After "DISABLE" is selected in the AUTOMATIC DATA
STORE menu, the settings will not be stored in the memory
unless you select "YES" in the "STORE ?" menu.
6 If the "RETURN USER MODE?" menu appears, use the
CURSOR
or
button to select either "YES" or "NO" and
press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
button to select either "DISABLE" or
A U T O M A T I C D A T A S T O R E
85
D I S A B L E
E N A B L E
RETUR N USER MOD E?
Y E S
N O
SETTING
Advertisement
Table of Contents
