Download  Print this page

NEC X462S Installation Manual

46” lcd display
Hide thumbs
   

Advertisement

Quick Links

X462S Installation Guide
46" LCD Display
Contents:
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Display Dimensions
Optional Table Top Stand Dimensions
Dimensions of Optional Wall Mount (WMK-4655S)
Input Terminals
Control Codes

Product Description

Type:
Resolution:
Aspect Ratio:
FCC:
Class
Power Consumption:
BTU's:
375.3
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched ho rizontally
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Tilt Angle and Rotation
Monitor may be angled and rotated from normal landscape and portrait orientation to both face up and face down positioning. When
orientated in face up or face down position, operating temperature for the unit changes. Rotate only clockwise for portrait orientation.
Operating Temperatures:
Landscape: 5-40° Celsius; 41-104° Fahrenheit
o
Portrait:
o
LCD Display
1920 x 1080
16:9
B
W
110W (typ)
4 BTU/hour
Built-In
5-40° Celsius; 41-104° Fahrenheit
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Screen Surface:
Dimensions without stand: 41.7"(W) x 24.1"(H) x 1.8"(D)
Dimensions with stand:
eight without stand:
Weight with stand:
Speaker
Face Up: 5-35° Celsius; 41-95° Fahrenheit
Face Down: 5-35° Celsius; 41-95° Fahrenheit
NEC Australia Pty Ltd
Rev 1.0
Anti-Reflective
41.7"(W) x 25.6"(H) x 13.0" (D)
45.6 lbs / 20.7 kg
49.6 lbs / 22.5 kg
X462S
Page 1 of 8

Advertisement

loading

  Also See for NEC X462S

  Related Manuals for NEC X462S

  Summary of Contents for NEC X462S

  • Page 1: Product Description

    NEC Australia Pty Ltd X462S Installation Guide 46” LCD Display Rev 1.0 Contents: Product Description and Notes Page 1 Tilt Angle and Rotation Page 1 Ventilation Requirements Page 2 Display Dimensions Page 3 Display Dimensions Page 4 Optional Table Top Stand Dimensions...
  • Page 2: Ventilation Recommendations

    The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
  • Page 3: Display Dimensions

    NEC Australia Pty Ltd X462S Installation Guide 46” LCD Display Rev 1.0 Display dimensions: Note: When handle is set to ‘carrying’ mode (out), overall depth is 2.47”. When in ‘thin’ mode (in), overall depth is 1.70” X462S Page 3 of 8...
  • Page 4 NEC Australia Pty Ltd X462S Installation Guide 46” LCD Display Rev 1.0 Display dimensions (cont.): X462S Page 4 of 8...
  • Page 5 NEC Australia Pty Ltd X462S Installation Guide 46” LCD Display Rev 1.0 Optional Table Top Stand Dimensions (ST-4020): X462S Page 5 of 8...
  • Page 6 NEC Australia Pty Ltd X462S Installation Guide 46” LCD Display Rev 1.0 Dimensions with Optional Wall Mount Kit (WMK-4655S): NOTE: Mount shown without offset spacers X462S Page 6 of 8...
  • Page 7: Input Panels

    NEC Australia Pty Ltd X462S Installation Guide 46” LCD Display Rev 1.0 Input Panels: Bottom: Side: Handle Positioning: Note: Handle can be adjusted per screws that are included with the monitor. Instructions are included in the manual. X462S Page 7 of 8...
  • Page 8: Control Codes

    NEC Australia Pty Ltd X462S Installation Guide 46” LCD Display Rev 1.0 Control Codes: NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection: Communication Protocol: Interface: RS-232C Parity: None Communication: Asynchronous Stop Bit: 1 bit...