Table of Contents
Advertisement
ADJUSTMENT
4) For alignment, hold down the CTL button, then use the
CURSOR buttons to align the pattern. For convergence, hold
down the CTL button and then use the CURSOR buttons to
align the Red or Blue pattern with the Green pattern.
NOTE: For more accurate convergence correction on edges,
perform the amplitude and linearity adjustments before the
POINT convergence adjustment.
Example: when correcting the horizontal line
When you have another adjustment point next to the
current one, press and hold down CTL and press
to correct the horizontal line.
When you don't have another adjustment point
next to the current one, press and hold down CTL
and press
to correct the horizontal line on the left
adjustment point
: current adjustment point
: next adjustment point
52
Advertisement
Table of Contents
