Table of Contents
Advertisement
Go to
https://support.lenovo.com/partslookup
replacement part:
Wi-Fi card
Remove the 2242 solid-state drive
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 27
Step 1.
Disconnect the battery pack cable from the system board, remove one screw, and remove the
2242 solid-state drive by pulling it away from the slot.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 10. Disconnect the battery pack cable, remove one screw, and remove the 2242 solid-state drive
Screw specifications
M1.6 × L1.7
Step 2.
Remove the SSD thermal pad.
Hardware Maintenance Manual
32
to look up the Lenovo part numbers of the following
Number of screws
1
Torque
1.2 ± 0.1 kgf-cm
Advertisement
Table of Contents
