Remove The 2242 Solid-State Drive (Ssd); Remove The 2280 Solid-State Drive (Ssd) - Lenovo 21A200M2IX Hardware Maintenance Manual

Remove the 2242 solid-state drive (SSD)

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 32
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove one screw and then remove the 2242 SSD module.
Screw specifications
M1.98 x L3.0
Step 3. Remove one screw and then separate the 2242 SSD from the SSD bracket.
Figure 8. Remove one screw and separate the 2242 SSD from the SSD bracket
Screw specifications
M2.0 x L2.0
Go to
https://support.lenovo.com/partslookup
replacement parts:
2242 SSD
2242 SSD bracket

Remove the 2280 solid-state drive (SSD)

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 32
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove one screw.
34
Hardware Maintenance Manual
Number of screws
1
Number of screws
1
to look up the Lenovo part numbers of the following