Remove The 2242 Solid-State Drive (Ssd) - Lenovo Slim Pro 7i Hardware Maintenance Manual

Figure 4. Remove the battery pack
Screw specifications
M2 x L3.5
Go to https://support.lenovo.com/partslookup
part:
Battery pack

Remove the 2242 solid-state drive (SSD)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 26
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove one screw and then remove the SSD by pulling it away from the slot.
Figure 5. Remove the SSD
28
Hardware Maintenance Manual
Number of screws
3
to look up the Lenovo part number of the following replacement