Table of Contents
Advertisement
Figure 14. Remove the antennas and camera board cable from the cable guide
Step 3.
Disconnect the fan cable from the system board, remove three screws, and remove the fan.
Figure 15. Disconnect the fan cable, remove three screws, and remove the fan
Screw specifications
M2 × L4
Go to
https://support.lenovo.com/partslookup
replacement part:
Fan
Remove the USB board
Make sure the following FRUs (or CRUs) have been removed.
Number of screws
3
to look up the Lenovo part numbers of the following
Torque
2 ± 0.2 kgf-cm
.
Chapter 4
Removing a FRU or CRU
35
Advertisement
Table of Contents
