Remove The Fingerprint Bracket; Remove The Fingerprint Bracket (For 14-Inch Models); Remove The Fingerprint Bracket (For 16-Inch Models) - Lenovo IdeaPad 5 2-in-1 14 9 Hardware Maintenance Manual

Remove the fingerprint bracket

Remove the fingerprint bracket (for 14–inch models)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 27
"Remove the battery pack" on page 29
Step 1. Remove one screw and remove the fingerprint bracket.
Figure 25. Remove one screw and the fingerprint bracket
Screw specifications
M1.6 × L1.7
Go to https://support.lenovo.com/partslookup
replacement part:
Fingerprint bracket
Remove the fingerprint bracket (for 16–inch models)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 27
Step 1. Disconnect the battery pack cable from the system board, remove one screw, and remove the
fingerprint bracket.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Hardware Maintenance Manual
42
Number of screws
1
to look up the Lenovo part numbers of the following
Torque
1.2 ± 0.1 kgf-cm