Area On The System Board Where Thermal Interface Materials Is Applied; Remove The Lower Case; Remove The Lower Case (For 14-Inch Models) - Lenovo IdeaPad 5 2-in-1 14 9 Hardware Maintenance Manual

Figure 2. Area on the heat sink where thermal interface materials should be applied

Area on the system board where thermal interface materials is applied

The following figure shows the area on the system board where thermal interface materials is applied.
Figure 3. Area on the system board where thermal interface materials is applied

Remove the lower case

Remove the lower case (for 14–inch models)
Make sure the computer has been shut down before servicing the computer.
Step 1. Place the computer upside down on a flat surface.
Step 2. Remove four screws, pry up the latches, and then remove the lower case.
.
Chapter 4 Removing a FRU or CRU
27