Remove the fingerprint board
Remove the fingerprint board (for 14–inch models)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 27
"Remove the battery pack" on page 29
"Remove the fingerprint bracket (for 14–inch models)" on page 42
Step 1.
Disconnect the fingerprint cable from the fingerprint cable. Then, remove the fingerprint board.
Figure 29. Disconnect the fingerprint cable and remove the fingerprint board
Go to
https://support.lenovo.com/partslookup
replacement part:
Fingerprint board
Remove the fingerprint board (for 16–inch models)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 27
"Remove the fingerprint bracket (for 16–inch models)" on page 42
Step 1.
Disconnect the fingerprint cable from the fingerprint cable. Then, remove the fingerprint board.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
45