Data; Diagnostic Report; Diagnostic Record - Launch Creader Professional 129i User Manual

LAUNCH
User Manual

7. Data

Fig. 7-1

7.1 Diagnostic Report

This module stores all diagnostic reports generated in process of vehicle
diagnosis.
All the diagnostic reports are sorted by Date and Make. If there are too many
( earch) to lter and uickly locate it.
reports stored, tap
• To select certain report, just check the box at the right lower corner of the
report. To select all reports, tap "Select All". To deselect all, tap "Unselect".
• Tap it to view its details.
• Select the desired report and then tap "Delete" to delete it.

7.2 Diagnostic Record

If user records the running parameters or waveform graphs while reading data
stream, it will be saved as diagnostic records and appear under this tab.
Tap "Diagnostic Record" to enter and select the desired data stream items and
tap "OK" to jump to the playback page.
On-screen Buttons:
Graph – displays the parameters in waveform graphs.
Combine – this option is mostly used in graph merge status for data comparison.
In this case, different items are marked in different colors.
Value – this is the default mode which displays the parameters in texts and
shows in list format.
Frame Playback – plays back the recorded data stream items frame by frame.
Once it is in frame playback mode, this button changes into "Auto Playback".
26