Inseego Wavemaker PRO FG2000e-3 Manual page 21

NOTE: The following APN fields may not be visible, depending on your service provider. Information
entered in these fields should come from your service provider based on network requirements.
APN: The access point name for your FW2010e. Use the drop-down to select a different APN. Select an
APN supplied by your service provider from the drop-down, or select Add APN and enter the APN for
your private network in the text box that appears below.
CAUTION! Changing the APN may cause a loss of data connectivity.
PDP: Select a type of Packet Data Protocol (PDP) from the drop-down (IPv4, IPv6, or IPv4/IPv6).
Desired action: The actions available depend on the SIM status. Possible operations include:
­ PIN Lock - If the SIM is currently PIN locked, you are prompted to enter the PIN.
NOTE: If an incorrect PIN is entered too many times, the SIM becomes PUK locked. A counter
indicates how many incorrect entries will cause PUK lock. Once PUK locked, the PUK must be
obtained from your service provider.
­ PUK Lock - If the SIM is currently PUK locked, the only operation possible is to enter the PUK.
NOTE: If an incorrect PUK is entered too many times, the SIM becomes permanently unusable.
You will need to obtain a new SIM. A counter indicates how many entry attempts remain.
­ Turn on PIN Lock - Sets the SIM so that entry of a PIN is required upon startup to connect to
the mobile network. To perform this operation, you must enter the current PIN.
­ Turn off PIN Lock - Turns off a PIN lock that was previously turned on so that entry of a PIN is
no longer required to connect to the mobile network. To perform this operation, you must
enter the current PIN.
Click Save Changes.
5G OUTDOOR CPE FW2010e USER GUIDE 21