Assembly - CARDIOSTRONG BALTIC PRO Assembly And Operating Instructions Manual

For more information, please visit cardiostrong.com, sport-tiedje.com

Hide thumbs Also See for BALTIC PRO:

Table of Contents

2.3

Assembly

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly

in the order given.



NOTICE

First loosely screw all parts together and check that they fi t properly. Tighten the screws

using the tool only when you are instructed to do so.

If you have diffi culty recognising the graphics, we recommend that you open and/or

download the PDF instructions stored in the webshop on your end device (e.g. smartphone,

tablet or PC). There you have the option of zooming in closer. Please note that the Adobe

Acrobat Reader programme must be installed on your end device in order

to open the fi le.

The assembly can also be found as a video under the following link:

www.sport-tiedje.co.uk/cardiostrong-rowing-machine-baltic-rower-pro-

cst-brpro#product-assembly. To go directly to the assembly video, you can

alternatively scan the QR code.

Step 1:

Assemble the slide rails

Place the seat on the fl oor with the rollers pointing upwards.

Place the slide rails (3L/R) with the aluminium plate downwards on the rollers of the seat (39) and

turn the slide rails (3L/R) in the direction of the arrow and make sure that the aluminium plates

touch the rollers.

Mount the rear stand (2) to the slide rails (3L/R) using four washers (74) and four screws (63).

Tighten the screws.

https://

Table of Contents

Do you have a question about the BALTIC PRO and is the answer not in the manual?

Cst-brpro