Table of Contents
Advertisement
HID-2340 User Manual
2.3 Cleaning and Disinfecting
During normal use of HID-2340, the device may become dirty and should be
regularly cleaned.
Cleaning Instructions
1. Turn off the computer before starting clean up. This way, you can see any
dirt on the screen; the brightness of the monitor may make you miss some
areas.
2. Wet a soft, lint-free or microfiber cloth with cleaning agent per
manufacturer's instructions or hospital protocol. Wipe the medical PC in a
gentle motion to remove dust, oil, or fingerprint smudges.
3. Wipe any moisture excess with a dry lint-free cloth to finish cleaning before
turning the computer back on.
Cleaning Tools
Below is a list of some items that may be needed or used when cleaning the
medical PC or medical PC peripherals.
Please keep in mind that some components in medical PC components may
only be cleaned using a product designed for cleaning that component.
Cleaning agent list: chemical disinfectants which have been tested on the
medical PC
No.
Cleaning agent
1
Acetic Acid
2
Acetone
3
Alcohol
4
Alcohol 70%
5
Ammonia
6
Artificial Perspiration (JIS K6772)
7
Boil Water
8
Caustic Soda
9
Cidex
10
Cold Cream Applied
11
Detergent (Kao Mypet) Applied
12
Ethanol
HID-2340 Quick Reference Guide
29
Advertisement
Table of Contents
