Cleaning And Disinfecting - Avalue Technology VNS-10WR2 Quick Reference Manual

VNS-10WR2

2.2 Cleaning and Disinfecting

During normal use of VNS-10WR2, the device may become dirty and should be regularly
cleaned.
Cleaning Instructions
1. Turn off the computer before starting clean up. This way, you can see any dirt on the
screen; the brightness of the monitor may make you miss some areas.
2. Wet a soft, lint-free or microfiber cloth with cleaning agent per manufacturer's
instructions or hospital protocol. Wipe the VNS Panel PC in a gentle motion to remove
dust, oil, or fingerprint smudges.
3. Wipe any moisture excess with a dry lint-free cloth to finish cleaning before turning the
computer back on.
Cleaning Tools
Below is a list of some items that may be needed or used when cleaning the VNS Panel
PC or VNS Panel PC peripherals.
Please keep in mind that some components in VNS Panel PC components may only be
cleaned using a product designed for cleaning that component.
Cleaning agent list: chemical disinfectants which have been tested on the VNS Panel PC
No. Cleaning agent
1. Water
2. Alcohol 75%
Caution!
 Do not immerse or rinse the VNS Panel PC or its peripherals. If you
accidentally spill liquid on the device, disconnect the unit from the power source.
Contact your Biomed Department regarding the continued safety of the unit before
placing it back in operation.
 Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol. Do not autoclave or clean the VNS Panel PC or

its peripherals with strong aromatic, chlorinated, ketone, ether, or Esther solvents, sharp tools
or abrasives. Never immerse electrical connectors in water or other liquids.
16 VNS-10WR2 Quick Reference Guide