12.1" intel atom soc processor apollo lake fanless rugged touch panel pc with iet expansion (82 pages)
Summary of Contents for Avalue Technology OFT-21W33
Page 1
OFT-21W33 21.5" Open Frame Panel PC Quick Reference Guide Ed – 26 January, 2021 Copyright Notice Copyright 2021 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No. E2017O213A1R...
Page 2
(2) Use only shielded cables to connect I/O devices to this equipment. (3) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2 OFT-21W33 Quick Reference Guide...
Page 3
RF exposure compliance, in order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm. OFT-21W33 Quick Reference Guide...
Page 4
“CAUTION - Use a power cord that matches the voltage of the power outlet, which has been approved and complies with the safety standard of your particular country.” “WARNING – To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth.” 4 OFT-21W33 Quick Reference Guide...
Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis. 1.2 Packing List 1 x OFT-21W33 Open Frame Panel PC 8 OFT-21W33 Quick Reference Guide...
DP++, HDMI/DP(HDMI/DP: 3840 x 2160 @ 30Hz, 2560 x 1600 @ 30Hz) Audio Port Line-out, Mic-in 2 x RJ45 LAN port (2 x Intel® I211AT, 10/100/1000 Base-Tx Gigabit LAN Port Ethernet Compatible) Wireless LAN 2 x Antenna Mounting with Dust Cover OFT-21W33 Quick Reference Guide...
Page 10
2 Test frequency : 5~500 Hz 3 Test axis : X,Y and Z axis 4 Test time : 30 minutes per each axis 5 IEC 60068-2-64 Test Fh Mechanical Shock 1 Wave from : Half Sine wave 10 OFT-21W33 Quick Reference Guide...
Page 11
4-feet drop resistance without package MIL-STD-810G Operating 0°C ~ 45°C (32°F ~ 113°F) Temperature Operating 0% ~ 90% Relative Humidity, Non-condensing Humidity Storage -20°C ~ 60°C (-4°F ~ 140°F) Temperature Note: Specifications are subject to change without notice. OFT-21W33 Quick Reference Guide 11...
2 x RJ-45 Ethernet Line-out Line-out jack Mic-in audio jack Mic-in DC power-in connector DC in DC in 2 pins Phoenix connector 2 x DP connector DP1/2 Power Switch 2 pins Phoenix connector for remote power 12 OFT-21W33 Quick Reference Guide...
OFT-21W33 1.6 Panel Mounting Panel mount is the solution for mounting OFT into the opening of wall (or cabinet). The dimension of opening is as below: (Opening dimension) (Panel thickness) (Installation surface) (Unit: mm) 14 OFT-21W33 Quick Reference Guide...
Page 15
Quick Reference Guide Step1. Insert and fasten 10 pcs Hexagon Studs on each side of the OFT-21W33 Panel Bracket. Hexagon Stud OFT-21W33 Item Part Name Quantity OFT-21W33 Quick Reference Guide 15...
Page 16
OFT-21W33 Step2. Assemble the 2pcs Bracket-RL on the left and right sides of the OFT-21W33 bracket by fastening 4 pcs screws on each side. Screw Bracket-RL Item Part Name Quantity 16 OFT-21W33 Quick Reference Guide...
Page 17
Quick Reference Guide Step3. Assemble the Front Bracket to OFT-21W33 and fasten 10 pcs screws on the corresponding Hexagon Studs. Front Bracket Screw Item Part Name Quantity OFT-21W33 Quick Reference Guide 17...
Page 18
OFT-21W33 Step4. Assemble the 6pcs Panel kit Brackets on the Front Bracket and fasten the 16 pcs screws to the corresponding holes. Screw Panel kit Bracket Item Part Name Quantity 18 OFT-21W33 Quick Reference Guide...
Page 19
Quick Reference Guide (outside the wall (or cabinet) opening) Step5. Embed the OFT-21W33 semi-finished product into the wall (or cabinet) opening. Wall Item Part Name Quantity OFT-21W33 Quick Reference Guide 19...
Page 20
Step6. Fasten the Panel mount screw*12 to the Panel mount kit bracket*12 (as shown in Figure 6-1), and then attach them to the Panel Kit Bracket*6 fixing slots. Figure 6-1 Panel mount Screw Panel Mount Kit Bracket Panel Kit Bracket Item Part Name Quantity 20 OFT-21W33 Quick Reference Guide...
Page 22
Step7. Fasten the Panel mount screw*12 against the wall, so that the entire module can be secured by the Panel mount screws and Panel mount kit brackets. Panel mount Screw Wall Item Part Name Quantity 22 OFT-21W33 Quick Reference Guide...
Page 23
Quick Reference Guide (The diagram is demonstrated by OFT-10W01, but the concept “the entire module can be secured by fastening the Panel mount screws against the wall” is the same) OFT-21W33 Quick Reference Guide 23...
Page 24
OFT-21W33 Step8. Paste the 2 pcs U Plates on the Front Bracket to complete installation. U Plate Front Bracket Item Part Name Quantity 24 OFT-21W33 Quick Reference Guide...
Page 25
Quick Reference Guide Step9. Paste the Decoration Plate on the U Plate to complete installation. Decoration Plate U Plate Item Part Name Quantity OFT-21W33 Quick Reference Guide 25...
Quick Reference Guide 1.7 Wall Mounting Wall mount is the solution for mounting OFT into the wall. Size of the opening: (Opening dimension) (Wall box installation dimension) (Installation surface) (Unit: mm) OFT-21W33 Quick Reference Guide 27...
Page 29
Step1. Install the 21” Wall Box and fix it on the wall, and use suitable screws to lock the wall box (the screws can be purchased according to actual needs) Wall box Item Part Name Quantity OFT-21W33 Quick Reference Guide 29...
Page 30
OFT-21W33 Step2. Assemble the 2pcs Bracket-RL on the left and right sides of the OFT-21W33 bracket by fastening 4 pcs screws on each side Screw Bracket-RL OFT-21W33 Item Part Name Quantity 30 OFT-21W33 Quick Reference Guide...
Page 31
Quick Reference Guide Step3. Fasten 10 pcs Hexagon Studs on each side of the OFT-21W33 Bracket. Hexagon Stud BCX11_156_ASSY Item Part Name Quantity OFT-21W33 Quick Reference Guide 31...
Page 32
OFT-21W33 Step4-1. Assemble the Front bracket to OFT-21W33, and fasten 14 pcs screws to the 10 corresponding Hexagon Studs locations and 4 Bracket R/L locations. Step4-2. Fasten the 3 pcs wall mount kit to the top of the Front bracket with 6pcs screws Step4-3.
Page 35
Quick Reference Guide Step5. Fasten the Ground wire with 2 screws on the ground screw holes of Front bracket and Wall box. Ground wire Screw Front bracket Wall box Item Part Name Quantity OFT-21W33 Quick Reference Guide 35...
Page 36
OFT-21W33 Step6. Wrap the Kensington lock (option) around the hole in the Front bracket and attach the lock to the keyhole in the Wall box. Kensington lock Front bracket Wall box Item Part Name Quantity 36 OFT-21W33 Quick Reference Guide...
Page 37
Step6-1. Store the Ground wire and Kensington lock in the Wall box and embed the OFT-15W33 semi-finished product into the wall (Wall Box). Step6-2. Paste the Decoration Plate on the Front bracket to complete installation. PC bezel Item Part Name Quantity OFT-21W33 Quick Reference Guide 37...
Quick Reference Guide 2. Hardware Configuration For advanced information, please refer to: 1- EMX-APLP included in this manual. Note: If you need more information, please visit our website: http://www.avalue.com.tw OFT-21W33 Quick Reference Guide 39...
In RS-232 Mode Signal PIN PIN Signal NDCD# NDSR# NRXD NRTS# NTXD NCTS# NDTR# NRI# In RS-422 Mode Signal PIN PIN Signal TxD1- TxD1+ RxD1+ RxD1- In RS-485 Mode Signal PIN PIN Signal DATA1- DATA1+ 40 OFT-21W33 Quick Reference Guide...
Label Function Note FAN1 CPU fan connector 4 x 1 wafer, pitch 2.54mm FPT1 Front Panel connector 1 5 x 2 header, pitch 2.54mm FPT2 Front Panel connector 2 5 x 2 header, pitch 2.54mm 44 OFT-21W33 Quick Reference Guide...
Page 45
Mini-PCIe connector 1 5 x 2 header, pitch 2.00mm JLPC1 LPC connector PWR1 Power connector 2 x 2 wafer, pitch 4.20mm SATA1/2 Serial ATA connector 1/2 SPWR1/2 SATA Power connector 1/2 4 x 1 wafer, pitch 2.54mm OFT-21W33 Quick Reference Guide 45...
Page 46
DCIN1 I2C1 I2C connector 5 x 1 header, pitch 2.00mm HDMI1 HDMI connector LOUT1 Line-out audio jack MIC1 Mic-in audio jack DMIC1 Digital Microphone connector 5 x 1 header, pitch 2.54mm SIM1 SIM card slot 46 OFT-21W33 Quick Reference Guide...
OFT-21W33 2.4.7 Serial port 1/2 connector (COM1/2) COM1 COM2 Signal PIN PIN Signal 2.4.8 Serial port 3/4/6 connector (COM3/4/6) Signal PIN PIN Signal 50 OFT-21W33 Quick Reference Guide...
OFT-21W33 2.4.11 General purpose I/O connector (DIO1) Signal PIN PIN Signal SMB_CLK SMB_DATA 2.4.12 SATA Power connector 1/2 (SPWR1/2) SPWR1 SPWR2 Signal +V5S_SATA +V12S_SATA 52 OFT-21W33 Quick Reference Guide...
Front Audio connector (FAUD1) Signal PIN PIN Signal LINE2_JD LINE2_L SENSE_B MIC2_JD LINE2_R AUD_FRONT_DET MIC2_R MIC2_L 2.3.19.1 Signal Description –Front Audio connector (FAUD1) Signal Signal Description LINE2_JD AUDIO IN (LINE_RIN/LIN)sense pin MIC2_JD MIC IN (MIC_RIN/LIN) sense pin 56 OFT-21W33 Quick Reference Guide...
2. BLK_UP with GND/BLK_DN with GND: Step control LVDS Backlight by use button and BIOS must to be set “BR Button”. (Please refer to page.61) 2.4.27 LED indicator connector 1 (LED1) Signal L1_1000#_LED L1_100#_LED L1_ACT_N L1_ACT_P 60 OFT-21W33 Quick Reference Guide...
If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP OFT-21W33 Quick Reference Guide 65...
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. 66 OFT-21W33 Quick Reference Guide...
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. OFT-21W33 Quick Reference Guide 67...
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 68 OFT-21W33 Quick Reference Guide...
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. OFT-21W33 Quick Reference Guide 69...
INT1Ainterface will not be available. 3.6.2.2 ACPI Settings Item Options Description Enables or Disables System ability to Disabled Enable Hibernation Hibernate (OS/S4 Sleep State). This Enabled[Default], option may be not effective with some 70 OFT-21W33 Quick Reference Guide...
You can use this item to set up or change the IT8528 Super IO configuration for serial ports. Please refer to 3.6.2.3.1~ 3.6.2.3.5 for more information. Item Description Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA). OFT-21W33 Quick Reference Guide 71...
Set Parameters of Serial Port 5 (COME). 3.6.2.3.1 Serial Port 1 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 72 OFT-21W33 Quick Reference Guide...
3.6.2.3.2 Serial Port 2 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.3.3 Serial Port 3 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled OFT-21W33 Quick Reference Guide 73...
3.6.2.3.4 Serial Port 4 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.3.5 Serial Port 5 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 74 OFT-21W33 Quick Reference Guide...
Enabled, Smart Fan Function Enable or Disable Smart Fan. Disabled[Default] 3.6.2.4.1 Smart Fan Mode Configuration Item Option Description Manual Mode[Default]/Mode 01/Mode CPU Smart Fan Mode CPU Smart Fan Mode Select. 02/Mode 03/Mode 04/Mode 05/Mode 06/Mode OFT-21W33 Quick Reference Guide 75...
Select Fixed Time, system will wake on Wake system from S5 Fixed Time the hr::min::sec specified. Select Dynamic Dynamic Time Time, System will wake on the current time + Increase minute(s). Wake up minute increase Wake up minute increase. 76 OFT-21W33 Quick Reference Guide...
Page 77
15 for 3pm. Select 0-23 For example enter 3 for 3am and Wake up minute 0-23 15 for 3pm. Select 0-23 For example enter 3 for 3am and Wake up second 0-23 15 for 3pm. OFT-21W33 Quick Reference Guide 77...
OFT-21W33 3.6.2.6 Serial Port Console Redirection Item Options Description Disabled[Default], Console Redirection Console Redirection Enable or Disable. Enabled 3.6.2.7 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. 78 OFT-21W33 Quick Reference Guide...
This option controls the Max Core C State that Max Core C State Core C7 cores will support. Core C6 Core C1 Unlimited Disabled C-State Auto Demotion Configure C-State Auto Demotion. C1[Default] Disabled C-State Un-demotion Configure C-State Un-demotion. C1[Default] 80 OFT-21W33 Quick Reference Guide...
IPV6 HTTP boot option will not be created. Wait time to press ESC key to abort the PXE PXE boot wait time boot. Number of times presence of media will be Media detect count checked. OFT-21W33 Quick Reference Guide 81...
Enabled UPON REQUEST – GA20 can be disabled using BIOS services. ALWAYS – do not Upon Request[Default] GateA20 Active Always allow disabling GA20; this option is useful when any RT code is executed above 1MB. 82 OFT-21W33 Quick Reference Guide...
Item Options Description Enables Legacy USB support. AUTO option Enabled[Default] disables legacy support if no USB devices are Legacy USB Support Disabled connected. DISABLE option will keep USB Auto devices available only for EFI applications. OFT-21W33 Quick Reference Guide 83...
2.25 GB Max TOLUD Maximum Value of TOLUD. 2.5 GB 2.75 GB Enable/Disabel above 4GB Enabled MemoryMappedIO BIOS assignment This Above 4GB MMIO BIOS assignment Disabled[Default] is disabled automatically when Aperture Size is set to 2048MB. 86 OFT-21W33 Quick Reference Guide...
Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Driver or Hard Disk Drive. Disabled[Default] Enable/Disable SATA Port 0/1 DevSlp. Board SATA Port 0/1 DevSlp Enabled rework for LP needed before enable. OFT-21W33 Quick Reference Guide 95...
Secure Boot Mode –Custom_Standard, Set UEFI Secure Boot Mode to STANDARD mode or CUSTOM Standard Secure Boot Customization mode or CUSTOM mode, this change is effect after Custom[Default] save. And after reset, the mode will return to STANDARD mode. 98 OFT-21W33 Quick Reference Guide...
1~ 65535 activation key. 65535(0xFFFF) means indefinite waiting. On[Default] Bootup NumLock State Select the Keyboard NumLock state Disabled[Default] Quiet Boot Enables or disables Quiet Boot option Enabled Boot Option #1 Set the system boot order. OFT-21W33 Quick Reference Guide 99...
This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. 100 OFT-21W33 Quick Reference Guide...
Quick Reference Guide 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. OFT-21W33 Quick Reference Guide 101...
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Install. Step 4. Click Finish to complete setup. Step1. Click Next. Step 2. Click Accept. 102 OFT-21W33 Quick Reference Guide...
If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next. Step 4. Click Finish to complete the Step 1. Click Next to continue setup. setup. Step 2. Click Next. OFT-21W33 Quick Reference Guide 105...
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to Install. Step 2. Select Finish to complete Installation. 106 OFT-21W33 Quick Reference Guide...
Quick Reference Guide 5. Development Resource Here you can find development resource for OFT-21W33 Datasheet LCD Datasheet(LVDS) Touch Screen Datasheet Adapter Datasheet CE/FCC test Report (Product Design Verification Report) Here you can find information for Software development How to flash Android image file OFT-15W33 / OFT-21W33 Android x86 8.1 Image...