Network Stack Configuration - Avalue Technology EMX-RPLP User Manual

tem
USB transfer time-out
Device reset time-out
Device power-up delay
JetFlashTranscend
8GB 1100

3.6.2.12 Network Stack Configuration

Item
Network Stack
Options
1 sec
5 sec The time-out value for Control, Bulk, and Interrupt
10 sec transfers.
20 sec[Default]
10 sec
20 sec[Default]
USB mass storage device Start Unit command time-out.
30 sec
40 sec
Maximum time the device will take before it properly
Auto[Default] reports itself to the Host Controller. 'Auto' uses default
Manual value: for a Root port it is 100ms, for a Hub port the
delay is taken form Hub descriptor.
Auto[Default]
Mass storage device emulation type. 'AUTO'
Floppy
enumerates devices according to their media format.
Forced FDD
Optical drives are emulated as 'CDROM', drives with no
Hard Disk
media will be emulated according to a drive type.
CD-ROM
Options
Disabled[Default]
Enabled
Description
Description
Enable/Disable UEFI Network Stack.
EMX-RPLP User's Manual 53
User's Manual