Returnstar Interactive Tech IQTouch HA1100 Pro User Manual page 31

Input sources
OPS is fixed to display on touch screen. If the OPS has a signal, the OPS icon will light up. Tap the
icon to enter the OPS channel. If the touch screen has no OPS, "No Signal" will be displayed.
Other input sources include: Type C Rear, HDMI 2, HDMI 1, DisplayPort, HDMI Front, and Type C
Front. The icon will be displayed in this Input area after its source is connected. Click the icon to
enter the corresponding channel.
Status Bar
The upper right corner of the home page shows working status icons, including: U disk, Ethernet,
Wi-Fi and hotspot.
Icons Functions
If the product is connected to Ethernet, the icon will be displayed. Tap
the icon to enter the corresponding setting menu.
If the product is connected to Wi-Fi, the icon will be displayed. Tap
the icon to enter the corresponding setting menu.
This icon will be displayed when touch screen is connected to hotspot.
Click the icon to enter its setting.
If USB flash memory(s) is connected to the USB port, this icon will be
displayed. Tap the icon to enter File Commander.
If the files cannot be saved to a USB flash memory successfully, use a
USB flash memory less than 16 GB and change the file system into
FAT 32 format.
29